How To Pump Water Off Your Pool Cover | Electric Swimming Pool Pumps

It is only safe to keep your pool covered during winter to avoid extra maintenance tasks. However, it is not always a smooth ride when you want your pool cover to last. It is because as much as the pool cover protects your pool, rainwater or snow will collect on top. As a result, the latter will sag, which will make it tear. A saggy pool cover will also not perform its purpose. Therefore, you have to come up with a way to pump water off your pool cover.

There are various methods that you may use to get the water off your cover. They may include: 

  • use of an electric pump
  • Siphoning using a hosepipe
  • Bucket

In this article, we are going to look at these methods in details. We emphasize that you pump the water off your pool cover throughout the season. 

Electric Pump

Use of an electric swimming pool pump is the most effective way draining water from a pool cover. However, it is also the most expensive method to use. You will need to purchase an electric pump which should be submersible in water. Before considering this method, you should ensure that you have a long cord to connect to the electricity. Also, ensure that there is a draining place close to the pool. Well, you can now see why it can be a little expensive.

Let the pump sit in the water before getting started. Ensure that it is in the central part of the water collection. Attach a hose pipe to the pump and direct it towards the direction of the yard or desire place to drain the water. Then start the pump once you have set all the above up. Well, this is not going to be the quietest process but certainly the fastest. Nevertheless, using an electric pump to get the water off your pool cover also has a downside. You will not be able to drain the water from the cover completely.

electric swimming pool pump

In addition to the above, debris and dirt in the water might clog the pump and thus making it impossible to get it to work. As a result, you will need to spend more money trying to repair the pump every time your pump clogs from debris.

Bucket

Using a bucket to get water off the pool cover is the most tiresome and lengthy process. I mean, you will have to scoop water from the pool using a bucket. If you are trying to pump water off a large pool cover, then you may want to avoid this method. All you will have to do is use a bucket to fetch water from the sheet and onto the ground. Once again, there is a chance that you will not be able to get the water off completely. Furthermore, you will have to come into contact with the disgusting water. The water collected on the pool cover may contain bacteria and is also quite yucky to touch.

However, using a bucket will help you get all the water off the cover. It is one advantage over the use of an electric pump. Besides, you will not have to cater for maintenance costs or fear to clog since it is impossible. Even though it is going to be a tiresome process, it is easy, and anybody can do it. Thus, we can say that it is cost effective even though time-consuming. Even though the pump will not empty the water from the cover, it will help you keep it from sagging. 

Hosepipe

Using a hosepipe to pump water off the pool cover is probably the least expensive yet most effective method. Not only is it comfortable, but it will also produce results in the shortest time possible. However, it is not certainly an all smooth process. You will have to figure out a way to start the water flow from the pool cover to the draining ground. 

In most cases, most people will suck the water using their mouths to initiate the process. It can turn out to be quite unappealing if the water gets in your mouth somehow. Therefore, you will need to be very careful while using a hosepipe to remove water from a pool cover. 

However, to get it started, you should dip one end of the hose in the water. It is vital that you avoid sucking the water from the pool. As we mentioned earlier, the water is not exactly safe nor pleasant to have in your mouth or even skin. Instead, ensure that you submerge the entire hosepipe in the water. Once it fills with the yucky water, please put it in such a way that it drains the latter onto the ground. You can pump the brown yucky stagnant liquid to your yard or garden.

Using a hose will give you almost the same efficiency as an electric pump. Unless the debris in the water is large, you will not experience any problems with clogging. Therefore, you may consider this as an excellent method to pump water off your pool cover during the adverse winter and rainy weather.

Conclusion

The truth is, you should think about how to get water off your cover when buying it. If you are dealing with an above ground swimming pool, then you should be keen with water collecting on the cover. Well, we cannot disregard the use of a swimming pool cover, especially during the winter. You will most definitely not be using the pool, and you need to protect it. Otherwise, you will need to keep treating it even if you are not using it. It can be tiresome and also expensive because of the chemicals you will have to purchase. Also, you cannot afford to ruin a swimming pool cover since it is costly. Therefore, you will need to continually pump water off the latter to avoid damage or even saggy lids. 

You will have to decide the best way to keep the water from collecting on the cover based on your preference. 

You may also want to check: blue wave drain for winter pool cover | pool covers hq

How to Remove Pool Filter Cover?

Swimming pool owners need to know how to remove the pool filter cover to be able to clean the pool filter when needed. As cleaning of such equipment is essential to eliminate all the dirt gathered on the entire swimming pool water and as well as to maintain crystal clear water circulating the whole pool which most swimmers prefer to dive and swim.

The materials needed to remove pool filter cover are screwdrivers and wrench. Prepare them before moving on with the steps on how to remove the pool filter cover.

Pool Filter Cover

First of the steps is to disconnect the electric source of the swimming pool filter. Unplug from the outlet. It is to prevent any electrocution or even pure electric shock when dealing with the filter. Then, close the valve under the swimming pool skimmer. It is to stop the flow of water towards the pool pump and the filter. Next, look for the drain plug of the filter tank. Open it. Release the pressure on the filter tank. It can often found at the bottom and right side of the filter. Try to look at those places. 

Swimming pool filters come in different variety. Some of which are the cartridge filters, and the DE sand filters on the other hand. To remove the cover of a cartridge filter type, only release the latches attached above the filter tank. While if the filter is a DE sand filter, to remove the cover will include untightening and removing the bolts which secure the filter cover. Make use of a wrench to do this. All swimming pool filters have the locking ring. It also requires to loosen and pop off. Unscrew the locking ring with the screwdriver. Then, slide off the locking ring of the swimming pool filter. In a slow-motion, lift the pool filter cover and away from the body to remove it. By doing so, the inside of the tank can now be accessible. Start doing what is required to do so.

Most pool owners find it hard to remove the pool filter cover. It is for the widespread reason that they over-tighten the cover upon seeing water spitting off the filter tank. Avoid over-tightening of a filter cover. It can only result in worse. More than the best effort required for removing the cover, it can lead to malfunction of the filter. Doing so can create air leak to which the pump absorbs; thus, the louder and rougher operation of the pool pump will come next.

If seen water coming off the filter cover while the pump is off, do not bother. It is not a sign of a leak.  It is the same when turning the water hose off the faucet. A small amount of water squirts off the hose bib, but then it will stop soon. Do not even tighten the cover more to fix it. It is not the right thing to do. Replumbing of the pump can be the effect–another expense to waste.

How to Measure Above Ground Pool Cover

Above ground swimming pools are ideal for cold places. It is a type of swimming pool preferred for pool lovers with a tight budget. Like in-ground swimming pools, an above ground pool requires the same protection and care. To get ready for the winter and as preparation in the closing of the swimming pool, the very first thing that needs to do is to measure the right size of the swimming pool cover that will perfectly fit the above ground swimming pool owned. It is to have a stress-free winter season in such a way that the above ground pool cover purchased undoubtedly performs its job which starts at the right measurement in the first place. 

In an above ground swimming pool, the swimming pool cover for use is more likely of a sizable plastic hair cap which stretches on top of the above ground pool. It has an overlap that can use for ladders and other pool accessories. This cover has a bungee cord connected on grommets around the pool hem. It does not need any installation nor rollers unlike pool covers for in-ground swimming pools.  

measure above ground pool cover

Here are some of the steps on how to measure an above ground swimming pool cover which can be a big help on winter days:

  1. Measure the size of the above ground swimming pool. Include the top rails. Always take into consideration that part, mainly if the swimming pool exhibits wider rails on top. Make a record. Write them down.
  2. Decide on the preferred water level of the above ground pool owned. As standard, it should only measure 12” difference of water level from the swimming pool liner down to the pool water. If still wish to drain more water, use a more extensive pool cover size. Before a cover can put on, remove ladders, pump, and other swimming pool accessories. Put the winterizing chemicals on the measured pool water, then proceed with the cleaning. 
  3. Decide what style of winter cover wish to use. It is either a solid winter pool cover or a mesh type. Consider what the pool needs to decide what to purchase clearly. Also, buy a pool cover for different climates. Prepare two measurements for each–the size of the swimming pool and the chosen pool cover. Remember that the pool cover size should be more extensive in about 4 inches than that of the swimming pool size. Allot an additional 4 inches in every measurement result of the swimming pool. 
  4. When all measurements are ok, it is now time to purchase the pool cover. Upon receiving the purchased cover, do not hesitate to remove the packaging and check if it has the exact measurement as ordered. If not, contact the dealer and clear the issue. Make instructions to clarify what needs to correct in size. Secure the right fit. It contributes a lot in the effectivity of the above ground swimming pool cover. 

How to Install a Solar Pool Cover

To install a solar pool cover is manageable. It can accomplish by a single person alone. It does not also require professionals to do so.  Even the pool owner himself can make it. What’s important is the presence of mind and willingness in doing the task. 

Upon purchasing a solar pool cover, to fit it on the swimming pool must undergo twice in the cutting process — the initial cut and the final cut that would require about 2-3 weeks difference from the first cut. A solar pool cover usually loses about 10% in size for the first week; thus cutting too much should not practice. Do not be mistaken seeing it that big. 

Remove the solar cover from its packaging. Unfold and spread on top of the swimming pool. Its bubbly side should face the water and the smooth size above, facing the sunlight. Give the cover time to flatten the folds and to settle on its place. After a few hours, soothe the cover. Remove wrinkles and smoothen air pockets. Make use of a swimming pool broom to flatten the sheet on the surface of the swimming pool. When ready, do the first cutting on the solar cover. Use sharp scissors to shape the protection that is the same as that of the swimming pool. Allow a little part to get inside the skimmer box. 

pool cover install

Allot at least 10-15 cm. extra size for the pool cover. It should be a bit larger to result in a bowl effect in the middle and turn upward on sides of the swimming pool. It is to catch debris and dirt rather than fall down the water. It’s such an easy way to clean the cover when needs to remove in time. 

To be exact of the measurement and for best result, ask for help. Let the other hold the opposite side of the cover while working on the first cutting process. Be more aware of the movement of the solar cover upon doing the procedure. Secure all sides. 

Once the necessary fit has provided, stop cutting. Leave the solar cover at rest for 2-3 weeks. Let it sit on top of the swimming pool. After these days, come back and do the final cutting. Trim the right fit of the solar cover. It will be more accurate this time. 

Important Reminder: When the solar swimming pool cover has put on, adjust the settings of the pool chemicals the soonest. Knowing that the solar cover can reduce half of the pool’s chemical usage, already make adjustments. Turn down the pool chlorinator in half from its previous set-up. Same through with the pool’s chemical levels. Continue the changes until reach the perfect amounts. The standard chlorine level should not be more than 3ppm. If so, it can result in damaging the solar cover. The pool’s warranty can never be of use. Remove the solar pool cover when over chlorinating. Do not put on unless the chlorine level returns to normal.